Step 1. Create the images.

IMAGE 1 – PROMPTS
Place the anime image as the reference image then type in the prompt below.
🔽
Photorealistic studio product photograph, vertical 9:16. A heavily armored bipedal mecha-figure designer collectible figure of the reference image standing on a matte charcoal-grey tabletop inside a seamless light grey studio backdrop. Dynamic ready-to-pounce hero pose.
A glowing purple energy core panel set into the lower chest and abdomen and the eyes.
Exposed gunmetal-black mechanical joints, hydraulic pistons, ball joints and silver screws at shoulders, elbows, hips and knees. Soft cinematic product lighting, gentle key light from upper front, subtle cool rim light, soft contact shadow and faint reflection on the table. Hyper-detailed, sharp focus, premium garage-kit collectible aesthetic, 8k.

IMAGE 2 – PROMPTS
Place the ‘image 1’ as the reference image then type in the prompt below.
🔽
Turn this robot figure into an alternative mecha-pod in a form that emphasizes its features with a button in the middle with its signature logo engraved and subtle neon light lit up in the core, it lies on the table with the logo facing upward. 9:16 ratio photo.

IMAGE 3 – PROMPTS
Place the ‘image 2’ as the reference image then type in the prompt below.
🔽
Leave the atmosphere exactly the same, but place a female’s palms, and place the pod on her palms with the neon lights turned off. The brings the pod close to the camera a distant from the table. Photo in 9:16 ratio.

Step 2. Create the VIDEOS.

VIDEO 1
Place the IMAGE 3 as the starting frame, and then place the IMAGE 2 as the ending frame and type in the prompt below
🔽

First frame: the provided object — a compact armored mechanical pod with a distinct emblem at its center-top. Treat that central emblem as the object’s activation button.
Action (5 seconds, single continuous take):
the hand holding the pod, the hand uses the thumb to firmly press the emblem engraved in the center. The emblem lights up and neon energy lines instantly ignite and cascade outward along every seam, panel gap and edge, spreading from the center to the outer rim until the whole pod glows. The hand then throws the pod onto the matte table. It lands with a single solid impact, rocks and wobbles side to side a couple of times as it finds its balance, then settles dead-still and upright, fully glowing, the central emblem facing up. Camera: static locked-off, eye-level product angle. Motion: realistic gravity and weight, crisp clean motion, absolutely NO motion blur and NO distortion, parts never clip through each other. Audio (clean close-mic ASMR, no music, quiet room tone): a soft tactile click as the emblem button is pressed; a rising electric power-up hum with a tiny crackle as the neon lines ignite and spread outward; a short whoosh as it drops; one solid heavy impact on the table; soft rocking taps as it wobbles and balances; a final settling clink; then a low steady energy hum.

VIDEO2
Place the IMAGE 2 as the starting frame, and then place the IMAGE 1 as the ending frame and type in the prompt below
🔽

The pod transforms into the robot like a precise die-cast Transformers toy. Every robot part physically unfolds, hinges, slides, rotates and locks out of an existing pod part. A RIGID hard-surface mechanical assembly with visible hinges, pistons and joints. One stage locks before the next moves. No background music.
1) The pod shell splits and hinges open, panels swinging outward — the pod stays intact, just reconfiguring.
2) the lower claw-segments unfold downward and lock into feet and legs, planting on the table to establish balance and center the body.
3) armor panels slide and fold out from the FRONT and the REAR of the pod, wrapping around the exposed inner core and locking together into the chest and abdomen.
4) once the legs and torso are set, from each shoulder of the torso a folded arm unit rotates out and deploys in three telescoping segments — first the upper-arm extends out, then the forearm unfolds down from it, then the clawed hand unfolds open last. Each segment snaps and locks. Both arms finish swung out to the sides.
5) from the BACK, a single head-block mass rises up and flips up-and-over the shoulders, locking at the neck on top of the torso. THEN from that head-block the remaining head parts deploy outward — the jaw and teeth slide forward, the two ears flip up, the side face-plates fold in and lock around it, and the eyes ignite bright cyan last.
6) from the lower back a base tail segment emerges, then additional armored segments telescope and lock onto it one by one, the tail visibly growing longer segment by segment as it arches up high; cyan energy lights between the segments from base to tip as each locks.
7) The fully assembled robot settles into a crouched hero pose with a final energy surge, all lines glowing steady. Conserve all material: no part melts, grows from nothing, morphs, stretches, fades or appears from nowhere. Hard panels moving in clean discrete mechanical steps, physically grounded, realistic weight and gravity.
Camera: slow orbit from a top-down angle on the pod to a low three-quarter hero angle. Audio: mechanical clacks and servo whirrs as the shell opens and the legs lock; panel slides as the torso forms; triple ratchet click-clacks as each arm segment telescopes out; a heavy flip-and-lock thunk as the head-block seats, then rapid clicks as the face parts deploy and a bright tone as the eyes ignite; sequential metallic locks as each tail segment attaches; a final heavy thud and low steady hum.

CLICK THE IMAGE BELOW FOR FULL FOLLOW ALONG TUTORIAL VIDEO